Water-borne Topcoat

PRODUCT NUMBER

ET 1030

TYPE

Two pack, high performance tile-like coating, based on water-borne catalyzed acrylic epoxy binder, with pigments and some functional additives.

USES

Decoration, and protection of concrete, masonry, cement plaster, steel structures, aluminum, etc.

CHARACTERISTICS

1. Easy to clean. 2. Good weathering ability. 3. Good corrosive and chemical resistance properties. 4. Water clean up and thinning. Non flammable and environmentally friendly. 5. High performance, comparable to solvent epoxy.

GLOSS

Above 60%

COLOR

White as standard, can be tinted to a wide variety of colours.

SPECIFIC GRAVITY

Above 1.05 kg/L (Mixed)

VISCOSITY (25 ℃)

75~90 KU (Mixed) (25 ℃)

DRYING TIME (25 ℃)

Set-to-touch 2 hrs. Dry hard 10 hrs(25℃) Full Cured 14 days(25℃)

OPTIMUM FILM THICKNESS

Wet 100μ（microns） Dry 40μ（microns）

OVERCOATING INTERVALS (25℃)

Min. 18 hrs. (25 ℃)

THEORETICAL COVERAGE

37.8 ㎡/Gal, 10.0m2/L

MIXER RATE

Depends on label.

NON-VOLATILE CONTENT

Above 45％

POT LIFE

24 hrs. (Mixed, 25 ℃)

THINNER

Water

THINNING RATE

0~5% （depends on tools used）

PRECEDING COATS

Continental FM 900 Intumescent Basecoat.

STORAGE SHELF LIFE

Minimum 1 year under normal storage conditions.

APPLICATION METHOD

Airless-spray, Brush.

NOTE

1. Before application, stir paint thoroughly, and if required thin with tap water up to 5%. 3. Moisture, grease, and dirt on substrate must be removed thoroughly. 4. The practical coverage will depend on a wide variety of factors. Generally, the practical coverage for brush, and spray will be 1.4 times, and 1.7 times their theoretical coverage.